I have a problem.
In random external locations image disappears on the monitor and video card fans start rotate at maximum speed. Nothing helps except rebooting pc. This problem even in low graphic settings and disabled OneTweak. This problem only in Enderal, thats why I write here.
GPU temperature is normal (40-50°С) and backplate to touch cold.
My specs: 4670k, gtx1070ti, 16gb ram
In launcher I choose 4 cores and 10gb memory
In random external locations image disappears on the monitor and video card fans start rotate at maximum speed. Nothing helps except rebooting pc. This problem even in low graphic settings and disabled OneTweak. This problem only in Enderal, thats why I write here.
GPU temperature is normal (40-50°С) and backplate to touch cold.
My specs: 4670k, gtx1070ti, 16gb ram
In launcher I choose 4 cores and 10gb memory
welcome to the forum 
just to let you know:
that's a new one.
(nice
?)
it's really only Enderal
otherwise I'd say it's a hardware issue, but..
you could take a look into Windows' event log (I can only give you german translations - actual words may be different):
(right after the next shutdown)
- search via taskbar for "event viewer"
- in that screen, open "custom views" and then something like "administrative events"
- is there anything of interest in that list on the right, right before you rebootet?
just to let you know:
that's a new one.
(nice
it's really only Enderal
otherwise I'd say it's a hardware issue, but..
you could take a look into Windows' event log (I can only give you german translations - actual words may be different):
(right after the next shutdown)
- search via taskbar for "event viewer"
- in that screen, open "custom views" and then something like "administrative events"
- is there anything of interest in that list on the right, right before you rebootet?
Which anti-virus program did you install?
Disable it temporarily.
Just a try...
Disable it temporarily.
Just a try...
hello, thanks for answer.
Yes, problem only in Enderal. I tested my video card in furmark for half-hour, also played other games in gpu max performance power management mode.
In Eventlog nothing interest except unexpected reboot.
I don't use anti-virus
Yes, problem only in Enderal. I tested my video card in furmark for half-hour, also played other games in gpu max performance power management mode.
In Eventlog nothing interest except unexpected reboot.
I don't use anti-virus
Did you play Skyrim on this system before, maybe with mods?
Were there similar problems?
Do you use an enb, ENBoost or similar tool for Enderal?
Do you play other HighEndGames on Steam without any problems?
Were there similar problems?
Do you use an enb, ENBoost or similar tool for Enderal?
Do you play other HighEndGames on Steam without any problems?
Yes, I am playing new highend games. For example AC Origins runs smooth.
I don't ever played Original Skyrim before, but I played Skyrim SE with tons of mods and no troubles with it.
In Enderal I don't use enb. Of the mods I've installed XPMSE, FNIS and Realisic Ragdolls and Force
I don't ever played Original Skyrim before, but I played Skyrim SE with tons of mods and no troubles with it.
In Enderal I don't use enb. Of the mods I've installed XPMSE, FNIS and Realisic Ragdolls and Force
That sounds strange, do you use overclocked Hardware (CPU/GPU)?
My CPU overclocked to 4 GHz, but it works stable, no throttling or overheat in games and stress-test
I don't know anything about overclocking,
but apparantly it's the game's engine that might have an issue with it
there's no harm in trying without :/
but apparantly it's the game's engine that might have an issue with it
there's no harm in trying without :/
Try to use only 2 cores and disable experimental multithreading (if it is activated).
edit:
But I think that's a hardware problem. Maybe caused by your overclocking. Or a broken hardware.
There is no known Skyrim engine error causing these problems.
Maybe you are reducing the overclocking.
edit:
But I think that's a hardware problem. Maybe caused by your overclocking. Or a broken hardware.
There is no known Skyrim engine error causing these problems.
Maybe you are reducing the overclocking.
Using 2 cores it played perfect for many hours and I was already glad that my problem solved, but then monitor signal missed again and I had to reboot pc. I dont know what to do
Have you ever tested how it affects the hardware overclocking undo? Did you also overclock the graphics card?
I still believe it's a hardware problem. It is possible that problems only affect some programs.
Alternatively you can try to reduce the overclocking.
edit: With your system, you do not really have to overclock for 3-4 FPS more ...
The Skyrim engine is limited to 60 FPS. You can set this in your graphic driver. Maybe this helps...
I still believe it's a hardware problem. It is possible that problems only affect some programs.
Alternatively you can try to reduce the overclocking.
edit: With your system, you do not really have to overclock for 3-4 FPS more ...
The Skyrim engine is limited to 60 FPS. You can set this in your graphic driver. Maybe this helps...
GPU not overclocked, stock frequences and power limir. I can try reduce CPU frequence but I think it's not necessary. If its hardware problem it can be or psu voltage problem or bad connect (6 pin or pci-e). This is definitely not a psu problem, because I measured the voltage with a multimeter, its withinin normal limits. Will try move card to another pci slot and will change power cable.
Last edited by bob-ttz on 16.02.2018 18:58, edited 1 time in total.
Please report. We have never had this problem...
And again: disable your overclocking. It is a coincidence that the problem so far only occured Enderal.
And again: disable your overclocking. It is a coincidence that the problem so far only occured Enderal.



